Argentina.jpg

General Information

Maize (Zea mays L) is second rated grain used collectively in form of foodstuff or fodder. Globally, maize is known as queen of cereals because it has highest genetic yield potential among the cereals. Grains provides food items which are consumed in the form of starch, corn flakes also glucose. It is also used as animal feed in poultry. Maize can be cultivated in any soil as they require less fertile soil and various chemicals. Moreover, it fetch less ripening span, 3 months, in comparison to paddy, which takes 145 days.

By growing maize, farmers can easily shield the deteriorating grade of soil , preserve 90% of water and 70% of potency as compared with paddy and can make more profit than wheat and paddy,” reported by vice chancellor, Punjab Agricultural University, Ludhiana. It serves as basic raw material to thousands of industrial products like oil, starch, alcoholic beverages etc. Uttar Pradesh, Rajasthan, Madhya Pradesh, Bihar, Himachal Pradesh, J & K and Punjab are major maize growing states. AP and Karnataka is major producer of maize in south.
 

Climate

  • Season

    Temperature

    25-30°C
  • Season

    Rainfall

    50-100cm
  • Season

    Sowing Temperature

    25-30°C
  • Season

    Harvesting Temperature

    30-35°C
  • Season

    Temperature

    25-30°C
  • Season

    Rainfall

    50-100cm
  • Season

    Sowing Temperature

    25-30°C
  • Season

    Harvesting Temperature

    30-35°C
  • Season

    Temperature

    25-30°C
  • Season

    Rainfall

    50-100cm
  • Season

    Sowing Temperature

    25-30°C
  • Season

    Harvesting Temperature

    30-35°C
  • Season

    Temperature

    25-30°C
  • Season

    Rainfall

    50-100cm
  • Season

    Sowing Temperature

    25-30°C
  • Season

    Harvesting Temperature

    30-35°C

Soil

Fertile well-drained alluvial or simply red loams free of coarse elements and full of nitrogen are ideal soils for maize cultivation. Maize can be grown on wide range of soils including loamy sand to clay loam. Definitely depleted plains are effective suited to the cultivation, even though it grows up in various hilly zones equally. Soils with fine organic matter containing good water holding capacity with pH ranging from 5.5-7.5 are required to increased yield. Heavy clay soil is not suitable for cultivation.

Soil test is necessary to know deficiency of any nutrient in the soil.
 

Popular Varieties With Their Yield

Him-123: It has yellow color seeds. The variety matures in 100-110 days.

Him-128: It has yellow color seeds. The variety matures in 100-110 days.
        
Ageti 76: It has orange color seeds. The variety matures in 90-95 days.

Prabhat:
It has yellow color seeds. The variety matures in 85-95 days.

Mansoor:
It has orangish-yellow color seeds. The variety matures in 85-95 days.

VL 42:
It has yellow color seeds. The variety matures in 85-90 days.

Vivek 9:
It has orange color seeds. The variety matures in 80-90 days. 

VL 16:
It has orange color seeds. The variety matures in more than 80 days.

VL 41:
It has yellow color seeds. The variety matures in 80-85 days.

VL 88:
It has yellow color seeds. The variety matures in 80-85 days.

Kanchan:
It has yellow color seeds. The variety matures in 75-80 days.
 

Land Preparation

For cultivation selected land should be free from weeds and remains of previously grown crop. Plough the land to bring the soil to fine tilth. It may take 2 to 3 plough. After ploughing planking should be done. Apply 8-10 tons/acre of well decomposed cow dung across the field; also apply 10 Azospirillum packets in field. Prepared furrow and ridges with 45 cm to 50 cm spacing.

Sowing

Time of sowing
Sowing should be done till 25th June.

Spacing
use line to line spacing of 60cm and plant to plant spacing of 20-22cm.

Sowing Depth
Seed should be sown at depth of 3-4 cm. For sweet corn cultivation keep depth of sowing to 2.5 cm.

Method of sowing

Sowing can be done manually by dibbling seeds or by mechanically with help of tractor drawn ridger seed drill.
 

Seed

Seed Rate:
Use seed rate of 8-10kg/acre.

Intercropping:
Pea can be taken as intercrop in maize plant. For that take one row of pea between maize crops. In autumn planted sugarcane maize can also take as intercrop. Sow one row of maize plant after two row of sugarcane.

Seed Treatment:
To protect seeds from soil borne diseases and insect pest, seed treatment is necessary. To protect seeds from downy mildew, treat the seed with Carbendazim or Thiram@3gm/kg of seeds. After chemical treatment, treat seed with Azospirillum@600gm+ rice gruel. After treatment shade dry seeds for 15-20 minutes. Azosprillum helps in fixing of atmospheric nitrogen in the soil.

Or use any one fungicide/insecticide from below

Fungicide/ Insecticide name Quantity (Dosage per kg seed)
Imidacloprid 70WS 5 ml
Captan 2.5 gm
Carbendazim + Captan (1:1) 3 gm


 

Fertilizer

Ferttilizer Requirement (kg/acre)

UREA
DAP MOP
50-62 20-25 16-20


Nutrient Requirement (kg/acre)

NITROGEN
PHOSPHORUS POTASH
23-28 3-4 9-12

 

Maize requires Urea@50-62kg/acre, DAP@20-25kg/acre and MOP@16-20kg/acre. Application of zinc sulphate @10kg/acre is done before sowing.

Full dose of potash and phosphorus is applied at the time of sowing. Nitrogen is applied in two equal splits, first is applied after 30-35 days of sowing and second is applied at the time of flowering.
 

 

Weed Control

Weeds are the serious problem in maize, particularly during kharif/monsoon season they compete with maize for nutrient and causes yield loss upto 35%. Therefore, timely weed management is needed for achieving higher yield. Take at least one or two hand weeding in maize crop. First 20-25 days after sowing and second when on 40-45 days after sowing. If weed infestation is high, spray with Atrazine @500gm per 150Ltr of water. After weeding, apply fertilizer as top dressing and carry out earthing up operation.

Irrigation

Apply irrigation immediately after sowing. Based upon soil type, on third or fourth day lifesaving irrigation is given. In rainy season, if rain is satisfactory then it is not needed. Avoid water stagnation in early phase of crop and provide good drainage facility. Crop required less irrigation during early stage, 20 to 30 days after sowing afterwards it required irrigation once in a week.

Seedling, knee height stage, flowering and grain feeling are the most sensitive stage for irrigation. Water stress at this stage can cause huge loss in yield. In case of water scarcity, irrigate alternate furrow. It will save water also.
 

Plant protection

maize Bacterial_Stalk_Rot.jpg
  • Diseases and their control:

Bacterial Stalk Rot: The stalk near the ground become water-soaked with brownish discolouration and are easily breakable and give unpleasant smell.

Avoid water logging in field and provide proper drainage. Apply Bleaching powder containing 33% chlorine@ 2-3 kg/acre as soil drench at pre-flowering stage.

TLB MAIZE.jpg

Turcicum leaf blight (TLB): This is one of the most important diseases in Northern and North-eastern hills and peninsular India and is caused by Exserohilum turcicum. If infection take place at silking stage then significant economic damages observed. Early symptoms show slightly oval, water soaked, small spots produced on leaves. First appeared on lower leaves in severe infestation complete plant give burning appearance. If not controlled at proper time, it has the potential to cause yield reduction up to 70%.

To control take spray of Mancozeb or Zineb @2-4 gm/litre at 10 days interval after first appearance of the disease.

MLB.png

Maydis leaf blight (MLB): MLB is caused by Bipolaris maydis and generally appears in warm tropical and sub-tropical areas to wet temperate climate. Young lesions are small and diamond shaped. As they mature, they elongate. Lesions may coalesce, producing a complete “burning” of large areas of the leaves.

Application of 2-4 sprays of Dithane M-45 or Zineb @ 2.0-2.5 gm/litre of water at 7-10 days interval from the first appearance of disease controls the spread of pathogen.

maize brown_stripe_downy_mildew.jpg

Brown stripe downy mildew: Lesions start developing on lower leaves as narrow chlorosis or yellow stripes, 3-7 mm wide, with well-defined margin and are delimited by the veins. The stripes later become reddish to purple. Lateral development of lesions causes severe striping and blotching.

Grow resistant varieties. Do Seed treatment with Metalaxyl@6gm/kg of seeds. Remove infected plant and destroyed away from the field. Spray with Metalaxyl@1gm/Ltr or Metalaxyl + Mancozeb@2.5gmLit of water.

POST FLOWERING STALK ROT MAIZE.jpg

Post flowering stalk rot: It is one of the most destructive diseases and is caused by complex association of multiple pathogens. It affects roots, crown region and lower internodes of crops.
 
If incidence of this disease is observed, then minimize use of potassium fertilizer. Follow crop rotation. Do not give water stress at flowering stage. Application of bio-control agent such as Trichoderma formulation in furrow @10gm/kg of FYM at 10 days prior to sowing provides good control.

maize Pythium_stalk_rot.jpg

Pythium stalk rot: In this disease, basal internodes become soft, dark brown water soaked, causing the plants lodge. Damaged internodes commonly twist before the plants lodge.

Remove remains of previous crop and keep field clean before sowing. Maintain optimum plant population in field. Do Soil drenching with Captan at basal internode (5-7week growth stage)@1gm/Ltr of water.

stalk and stem borer  maize.jpg
  • Pest and their control:

Stalk borer or stem borer: Chilo partellus, commonly known as stalk borer that appears throughout the monsoon time period. It is a serious bug all over the nation. Chilo lays eggs 10-25 nights after germination on inferior portion of the leaf. The larva gets into in the whorl and then triggers deterioration in the leaf and cause shot hole. Larva of stem borer is yellowish brown with a brown head.

For stem borer, release egg parasitoid Trichogramma chilonis@1,00,000/acre coinciding egg laying period. Three releases at weekly interval are desirable. Third release is to be accompanied with larval parasitoid Cotesia flavipes@ 2000/acre.

Mix Phorate 10%CG@4kg/acre or Carbaryl 4%G@1kg/acre with sand to make up total quantity of 10kg and apply in the leaf whorls on the 20th day of sowing. Or Spray insecticide like Carbaryl 50WP@1 kg/acre on the 20th day of sowing or Dimethoate 30% EC@200ml/acre. Spray of Chlorpyriphos@1-1.5ml/Ltr of water at 10-12 days after germination provides good control.

maize pink borer.png

Pink Borer (Sesamia inference): It inference arises in times of the winter season mainly in peninsular India. Larvae of the pink borer cause damage by feeding on all parts of maize plant except roots. The larvae form circular or “S” shaped tunnels filled with excreta inside the stem and, also show exit holes on the surface. In case of severe damage, breaking of stem occurred.

Seed treatment with Carbofuran (40F) 5% W/W @ 2.5g/kg of seed was also found effective. The Chilo can be regulated by introduction of 4 Trichocards (Trichogramma chilonis) per acre at ten days after germination. Light and pheromone traps can be used to assess the incidence of adult moths.

maize corn worm.png

Corn worm: Larva feeds on silk and developing grains. Larva of corn worms shows colour variation from greenish to brown. It has dark brown grey lines on the body with lateral white lines.

Set up pheromone traps at @5/acre. Apply Carbaryl 10D @10kg/acre or Malathion 5D@10kg/acre on 3rd and 18th day after panicle emergence.

maize shoor bug.png

Shoot bug: Shoot bug laid eggs inside leaf tissue and covered with a white waxy substance. Due to infestation plant become unhealthy, stunted and yellow. The leaves wither from top to downwards. The midribs of the leaves turn red due to egg-laying and may dry up subsequently.

If infestation is observed take spray of Dimethoate@2ml/Ltr of water.

maize termite.png

Termites: Serious pest of maize observed in most areas. To control apply Fipronil@8kg/acre followed by light irrigation.

If the termite incidence is in patches, than spot application of Fipronil@2-3kg granuled/plant should be done. Keep cleanliness in field.

maize shoot fly.png

Shoot fly: It is a major pest of South India but sometime observed in spring and summer crop in North India. It causes damage at seedling stage and causes drying of seedling or dead heart.

To control shoot fly infestation, Plough land after harvesting of previous crop also remove stubbles and remains of previously harvested crop. Do seed treatment with Imidacloprid @ 6ml/kg of seeds, it provides good control of the shoot fly. Soil application of Phorate 10%CG@5kg/acre at the time of sowing. Spray any one of pesticide like Dimethoate 30%EC@300 ml/acre or Methyl demeton 25%EC@450ml/acre.

Deficiency and their remedy

Zinc Deficiency
mostly observed in areas having use of high yielding variety. Broad band of white-yellow along with reddish veins are appeared on each side of mid rib on second or third leaf from top of plant.
To overcome zinc deficiency, apply Zinc Sulphate@10 kg/acre at time of sowing. If deficiency is observed in standing field, apply Zinc Sulphate and mixed with equal quantity of dry soils and apply along the rows.

Magnesium Deficiency
Common is maize crop. Mostly observed on leaves. Basel leaves give yellowish appearance between edge and veins of leaves. As a preventive measure foliar spray of Magnesium Sulphate@1kg/acre in maize.

Iron Deficiency

Whole plant give yellowish appearance. As a preventive measure for Iron deficiency, apply mixture of Micro-Nutrient@25 kg/acre along with sand@18 kg/acre after sowing of maize crop.

Harvesting

Harvesting should be done when cobs outer cover turns from green to white. The optimum time of harvesting maize is when the stalks have dried and moisture of grain as about 17-20%. Drying place or equipment should be dry, clean and disinfected.
 
Sweet corn harvesting: When crops come nears to maturity, examined a few ears daily to determine the time for the first picking. Corn is ready for harvest when the ear is full size for the variety, has a tight husk, and has somewhat dried silks. The kernels are fully developed and exude a milky liquid when punctured. Delay harvesting causes reduction in sugar content. Whether harvesting is done by hand or machine, sweet corn should be collected at night or early in the morning.

Baby corn:
Ears are harvested 45-50 days after emergence, when silks are 1-2 cm long (within 1-2 days after silk emergence). Harvesting is carried out in morning when temperature is low and moisture is high. The picking of baby corn should be done once in three days and generally 7-8 pickings are required depending on genotypes used.
 
Pop corn: Leave ears of popcorn on the plant for as long as possible. If the weather allows, leave them in the field until the husks are dry and papery.

Post-Harvest

Sweet corn must be moved quickly from the field to packing sheds, where it should be rapidly sorted, packed, and cooled. It is generally packed in wire bound wooden crates, which can hold from 4 to 6 dozen ears, depending on the size of the crate or ears.